If your buggy or off road rail has a Type 4, Bus engine and the 002 or 091 transmission you most likely will need one of the late model clutches. VW offered the 210mm clutch from 1972 through early 1974. From the middle of 1974 through 1975 VW Buses used a 215mm clutch. 1976 through 1979 all used the 228mm clutch. Some high horsepower engines that run high dollar transmissions may be running a 9"-288mm clutch.

We have 210mm clutches and pressure plates as well as the late style throw out bearings. Most all of the late model tranmissions will have the late model throw out bearing. The 215mm clutch isn't very common but we do offer both the clutch disc and the pressure plate. The 228mm clutch is the most common Bus set up and we have a pressure plate and disc for it as well.

If you have a 9" flywheel set up we offer 6 pad clutch discs. The clutch discs have feramic pads and a rigid hub center. They are available with a 33/G 50 Spline or with an 18 spline center. To cover all bases in the throw out bearing department for the oddities that are all too common in the off road world we also list the early style throw out bearing.


210mm Clutches

For the carbureted 1972 to 1974 Bus engine and transmission combination VW used a 210mm clutch set up.

Code: 022141025G

Price: $139.95

As low as $6.46 a month*

Processing...

Code: 211141032C

Price: $157.95

As low as $7.29 a month*

Processing...

215mm Clutches

Only offered by VW for a year and a half the 215mm clutches aren't very common but we have them if you need them.

Code: 022141025A

Price: $139.95

As low as $6.46 a month*

Processing...

Code: 025141031H

Price: $94.95

As low as $4.38 a month*

Processing...

228mm Clutches

1975 to 1979 VW Type 2 engines and transmissions use the 228mm clutch pressure plate and disc.

Code: 025141025

Price: $109.95

As low as $5.07 a month*

Processing...

Code: 025141031K

Price: $99.95

As low as $4.61 a month*

Processing...

9"/288mm Clutches

Mostly used in race buggys and high dollar sand and off road cars, we offer 2 different 9" clutch discs.


Throwout Bearings & Clutch Alignment Tools

Late model and early model throwout bearings and clutch alignment tools to finish off your new clutch installation properly.

Code: 111141165A

Price: $39.95

As low as $1.84 a month*

Processing...

Code: 111141177AS

Price: $2.95

As low as $0.14 a month*

Processing...

Code: 32-1205

Price: $39.95

As low as $1.84 a month*

Processing...

Code: 32-1208

Price: $1.95

As low as $0.09 a month*

Processing...

Code: 113141165B

Price: $34.95

As low as $1.61 a month*

Processing...

Code: 32-1210

Price: $32.95

As low as $1.52 a month*

Processing...

Code: 113141181A

Price: $3.95

As low as $0.18 a month*

Processing...

Code: 32-1204

Price: $10.95

As low as $0.51 a month*

Processing...

Code: 5302

Price: $4.95

As low as $0.23 a month*

Processing...

Code: 5335

Price: $4.95

As low as $0.23 a month*

Processing...
Recently Viewed Items: