VW Premium Floor Pans - Left & Right - 1973-77 Beetle - 1973-79 Super Beetle
Ships free*
- Description
-
Fits Years
- Videos
-
TechTips
- Shipping & Returns
- Q&A
- Shipping & Returns
Our Brand New Premium Replacement left and right side floor pans come complete with seat mounts and jack mounts. These are complete length & width floor pan halves and fit 1973 through 1977 VW Standard Beetles and 1973 through 1979 VW Super Beetles. The floor pans are 1.2mm thick and weigh 21.5 pounds each. (Purchasing front & rear patch sections will NOT make a complete floor pan). The 1973-79 VW floor pan features dual seat rails and the center hump. The center hump is included but may not be welded on at time of shipping as the manufacturer tries to consolidate size of package when shipping. This is an easy fix as installing floor pans requires welding on the tunnel side. Installation will require welding inner edge to chassis, just like original factory floor pans. Outer edge bolts to heat channel. Floor pan ships with black rust inhibitor. Floor pans will need to be sanded and primed prior to installation. Made in Brazil.
Our Expert's Take:
If your pans are beyond repair, don't waste your time with a cheap fiberglass patch, rivited in piece of sheet metal or worse, a piece of wood. Also note that if the pan is rusted through below the battery or opposite side, replacement rear quarter pans are not the correct shape for 1973 and later Beetles. Installing new floor pans can be done with the body on the chassis but will require trimming and of course welding for proper installation.
Note! - The cross members, jack supports and plates are not welded to the floor pan. We recommend leaving the factory cross member in place, and welding the pan on top of it. The jack support and plate will have to be welded to the pan if you choose to use them.
Floor pans are made from .04" (18 Gauge) Sheet Metal.
Test fitting your seats before installation insures that you don't do twice the work! Seats, floor pans and even the chassis could have been swapped so make sure you test fit your seat to the floor pan before installing it.
A replacement pan to body seal and floor pan hardware are recommended whenever installing new floor pans.
We also recommend replacing the seat rail bushings when installing new floor pans.
Test fitting your seats before installation insures that you don't do twice the work! Seats, floor pans, and even the chassis could have been swapped so make sure your test fit your seat to the floor pan before installing it.
Shipping
We offer FREE SHIPPING on orders over $100*Orders under $100 cost a flat-rate, $9.95*
*Continental United States only.
If you need express shipping, please call us for expedited shipping options. We will try to consolidate as much as possible to offer the lowest shipping rates.
Alaska, Hawaii, Puerto Rico, APO/FPO, & US TerritoriesFor orders to Hawaii, Alaska, APO/FPO, Puerto Rico and other US territories, we will provide you with your shipping options and the costs via phone. The shipping costs for these orders are billed at the time of shipping.
International ShippingWe do not ship internationally. We only ship to the USA and it's territories.
Returns
90 Day Return PolicyYou can return most unused, never installed, like-new items for 90 days from the date of receipt. Items must be in like-new condition.
The following items are final sale:
- Special order items
- Special order upholstery
- Electrical items
- Installed carburetors