Kicker QS Series Coaxial Speakers - 6x9" - Pair

Kicker QS Series Coaxial Speakers - 6x9" - Pair

For the audio quality fan, Kicker's Q Class Coaxial speakers offer premium sound. Neodymium magnets on the 6 x 9" woofer and 25mm Teteron® dome tweeter are bi-amp capable and have point source drivers. The QSC694 drivers have a custom wave guide for great phase alignment and ultra smooth frequency response. The Polypropylene cone is injection molded and impregnated with carbon-fiber for tight and accurate midrange sound. The NBR rubber surround gives superior damping, are stiched with KICKER’s signature blue double surround and enable the QSC speakers to handle 100 watts of RMS power. The pair of QSC694 speakers include independent 18dB crossovers that are optimized for size and have protection for the tweeters built in. The cross overs have metallized polypropylene capacitors, high-powered resistors and audiophile grade air core inductors to deliver outstanding sound quality and can easily be mounted in a door, behind a kick panel or under a seat.

Specifications

• Speaker Design - Coaxial 2 -way
• Woofer Size | in [mm] - 6 x 9 [160 x 230]
• Tweeter Size | in mm] - 1 [25]
• DC Resistance | ohm - 4
• Peak Power | Watts - 200
• Continuous Power | Watts, RMS - 100
• Sensitivity [SPLo] | dB @ 1W, 1m - 88
• High Pass [dB], at Frequency [Hz] - 18, 5.5k
• Low Pass [dB], at Frequency [Hz] - 18, 5.5k
• Mounting Hole Diameter | in [mm] - 4 13/16 x 8 5/8 [121.9 x 219]
• Mounting Depth | in [mm] - 3 [76.2]
• Tweeter Dome Material - Teteron®
• Woofer Cone Material - Carbon Fiber Infused Polypropylene
• Woofer Surround Material - Rubber

What is included?

• Two 6x9" 2 Way Coaxial Speakers
• Two Crossovers
• Two Grilles
• Two Crossover Input Jumpers (pre-installed)
• Two Thick Adhesive Backed Foam Gaskets
• Two Thin Adhesive Backed Foam Gaskets
• Two Adhesive Backed Motor Foam Discs
• Two Adhesive Backed Foam Strips
• Eight 10" Zip Ties
• One Kicker Logo Badge
• Four Crimp-on 1/4" Female Terminal Ends
• Four Crimp-on 3/16" Female Terminal Ends
• Eight Wire Butt Splices
• Sixteen 1" Sheet Metal Screws
• Eight 5/8" Sheet Metal Screws
• Eight Flat washers
• Sixteen Metal Nut Clips
• One Owner's Manual (Multi-lingual)
• Two Ford Mounting Brackets
• Two GM Mounting Brackets
• Two Toyota Mounting Brackets