1972-73 VW Beetle Complete Wiring Harness - Made by JBugs

This is a complete wiring harness for the 1972-1973 VW Standard Beetle Sedans & Sunfoofs. Our complete wiring loom will wire your entire car from headlights to tail lights. These complete wiring kits are great for repairing old dried out wiring, or replacing the original wires after a new paint job. The wiring harness is made from original wiring loom schematics, are factory color coded and are made with OEM AMP terminal ends. The wires are factory length and pre-terminated. Our complete harness includes detailed instructions which will simplify the task of rewiring your 1972 or 1973 VW Standard Beetle. The harness does not include switches, any wiring that is part of a switch, a fusebox, battery cables, ground straps or relays.

This complete wiring harness is designed for use with a 12 circuit fuse box and a column mounted wiper switch. If your 1971 Standard Beetle has a dash mounted wiper switch and a 10 circuit fuse box, use the JBP-113-70-71 wiring harness.

The JBP-113-72-73 wiring harness is set up to be used with a generator. It can easily be modified to work with an internally regulated alternator. If you have a factory installed, externally regulated alternator, the original wiring harness and plugs must be reused.

Wiring Harnesses can only be returned if the packaging remains sealed. Once a wiring harness has been opened, it cannot be returned.

Our Complete Wiring Harness includes:

• Fully detailed and illustrated Instruction Manual (including 7 color diagrams)
  
• 1 Main Harness
  
• 1 Starter Power Harness
• 1 Reverse Light Wiring Harness with separate Power Wire
• 1 Reverse Light Link
• 2 Tail Light Harnesses
• 1 License Light Harnesses
• 1 Coil Link Wire
• 1 Headlight & Horn Harness
• 1 Brake Master Cylinder Harness with separate Warning Light Wire
• 1 Fuel Sending Unit WIre
• 2 Headlight Ground Wires
• 1 Dome Light Harness
• 1 Dash Power Link Wire Assembly
• 1 Dash Ground Link Wire Assembly
• 1 Left Turn Signal Harness
• 1 Right Turn Signal Harness
• Turn Signal & Hazard Link Wire Assembly
• 4 Loose Hazard Switch Wires
• 1 Dash Light Link Wire Assembly
• 1 Running Light Link Wire Assembly
• 7 Loose Headlight & Relay Wires
• 2 Headlight Socket Housings
• 2 Wire Grommets
• 15 Shrouded Wire Connectors
• 1 Shrouded T Wiring Connector
• 2 Shrouded H Wiring Connectors

Please Note: The wires that are attached to the ignition switch, turn signal switch and the steering column bearing are not included with the harness. Those wires are part of those components. The battery ground cable, the battery positive cable (along with the supply wire that attaches to the voltage regulator) and the transmission ground strap are not included.