VDO Oil Pressure Sender - 80 PSI & Warning Light - 2 Post - M10-1.0 - Fits VW Oil Pressure Port

VDO Oil Pressure Sender - 80 PSI with Warning Light - 2 Post - M10x1.0

The 2 pole VDO oil pressure sender threads into the VW oil pressure port with an M10x1.0 thread size. The sending unit reads to 80 PSI for sending a signal to a separately sold VDO 80 PSI oil pressure gauge. The sending unit also has a contact for a warning light that turns on at roughly 7 PSI, meaning that if the oil pressure indicator light is on, your engine has less than 7 PSI of oil pressure at the switch.

This sending unit is designed to work with 80 PSI VDO gauges only and reads from 10-180 ohms. It operates by grounding out to the engine case. The sender unit has tapered threads, so PTFE tape or pipe sealant should not be used as it will interfere with the sending unit's ground to the engine case. The "G" terminal should be connected to the back of the pressure gauge, to the "S" or "G" terminal. The "WK" terminal should be connected to the negative side of the oil pressure warning light bulb.

Specifications

• Thread size: M10x1.0
• Max pressure: 80 PSI
• Warning light activation: ~7 PSI
• Signal: 10-180 ohms
• 2 post (gauge + warning light)

Product Fitment

• 1954-1977 VW Beetle
• 1971-1979 VW Super Beetle
• 1956-1974 VW Karmann Ghia
• 1955-1979 VW Type 2 Bus
• 1962-1973 VW Type 3
• 1973-1974 VW Thing
• 1980-1983 VW Vanagon