JBugs Video Series

JBugs Tips & Tricks - Fuel Filter & Tap Installation:

Product Fuel

Video Overview:

The flared end on replacement fuel taps can often seem a little too large to fit through the sealing washer and the mounting nut. Normally, a little extra push against a hard surface is all it takes to get the tap through the nut, and one it is fitted through the nut, just press it through the washer. Then you can slide a new fuel filter into the tank, follow it with the tap, the sealing washer and finally the nut to secure everything to the tank!

Products in this Video:


Video Transcript:

Here's an issue we get a lot—these taps oftentimes seem like they won't fit through these nuts. What you do is just put it on a hard surface and push that through. So this actually fits through here. Same thing goes for the washers. I've already pushed this one through, but that goes through there. That will install like so. And after you've pushed through that, as far as installing into our tank, we start with the filter, followed by the tap, our newly fit washer, and the nut. And that's the order of installation.