VW Running Boards - Billet Aluminum - Satin Black With Polished Lip - Pair
{{ attribute.raw_prompt }}
You will receive an email when this product comes back in stock.
Notification Email
Cancel
Select Wishlist
New Wishlist Will Be CreatedCancel
- Description
-
TechTips
- Shipping & Returns
- Q&A
- Shipping & Returns
Satin Black Billet Aluminum Running Boards for Volkswagen Beetle and Super Beetle
- Satin black with polished ribs
- Includes left and right running boards
- Made from solid billet aluminum for extreme durability
- Will not rust and built to last
- Compatible with all air-cooled Beetles and Super Beetles
This pair of billet aluminum Volkswagen Beetle or Super Beetle running boards are satin black with polished ribs. The set includes a left and right running board, as well as the hardware needed for installation. They are made of solid billet aliminum and are polished with polished rubs on the top surface, making them the strongest running boards on the market.
Product Fitment
- 1946-1977 Standard Beetle
- 1971-1979 Super Beetle
Running Board Installation Notes
All of our running boards will fit any air-cooled VW Beetle or Super Beetle if installed properly. The running boards have the same bolt pattern throughout the years - if you follow our instructions explicitly, we can assure you that the boards will fit. Trimming is usually required. The slots for the running board-to-body bolts may not allow the running boards to sit low enough on the body, which could prevent the door from closing properly.
- Loosen the 13mm fender bolts from the center of the fender down to the running board to allow movement of the fender.
- Loosely install 13mm bolts from the running board to the front and rear fenders.
- Align the running board to the body and loosely install four 10 millimeter bolts through the running board to the body. If the four 10 millimeter bolts do not align to the body, loosen more fender bolts to allow more movement.
- Check that the running board is all the way down on the 10mm bolts. If not, the door will scrape the running board rubber.
- Tighten the four 10mm bolts to secure the underside of the running board.
- Tighten the 13mm bolts from the running board to the fender.
- Tighten the 13mm fender bolts while realigning the fender beading.
Shipping
We offer FREE SHIPPING on orders over $100*Orders under $100 cost a flat-rate, $11.95*
*Contiguous United States only. Excludes Hawaii & Alaska.
If you need express shipping, please call us for expedited shipping options. We will try to consolidate as much as possible to offer the lowest shipping rates.
Alaska, Hawaii, Puerto Rico, APO/FPO, & US TerritoriesFor orders to Hawaii, Alaska, APO/FPO, Puerto Rico and other US territories, we will provide you with your shipping options and the costs via phone. The shipping costs for these orders are billed at the time of shipping.
International ShippingWe do not ship internationally. We only ship to the USA and it's territories.
Returns
90 Day Return PolicyYou can return most unused, never installed, like-new items for 90 days from the date of receipt. Items must be in like-new condition.
The following items are final sale:
- Special order items
- Special order upholstery
- Electrical items
- Installed carburetors
- Once mounted, wheels cannot be returned