1967 VW Beetle Fender - Front Passenger Side (Right)
{{ attribute.raw_prompt }}
You will receive an email when this product comes back in stock.
Notification Email
Cancel
Select Wishlist
New Wishlist Will Be CreatedCancel
- Description
-
Fits Years
-
TechTips
- Shipping & Returns
- Q&A
- Shipping & Returns
Front Passenger Side Fender for 1967 VW Beetle
- No bumper bracket cut-outs—brackets pass through the front apron
- Compatible with 1967 and later "bucket-style" headlight assemblies
- Comes with die-cut turn signal holes
- Made in Brazil
This brand new replacement front fender does not have bumper bracket cut-outs, as the bumper brackets pass through the front apron. It is compatible with 1967 and later "bucket-style" headlight assemblies and comes with die-cut turn signal holes.
Product Fitment
- 1967 VW Beetle (Passenger Side)
Notes on Sheet Metal:
- Virtually all sheet metal parts are sent with a black, sprayed-on, rust inhibitor. This is NOT a paint or a primer. The black paint that comes on most sheet metal items must be removed before applying primer to the sheet metal.
- Expect scratches, minor dents, dings, and imperfections. These are considered normal. You will likely have to perform minor body work on any aftermarket sheet metal during the installation and restoration process. This is a universal issue across the entire classic car industry due to the nature of the product.
- Large dents would be considered excessive damage. All sheet metal is carefully inspected prior to shipping for any major dents. Any sheet metal that is received dented must be presented to the shipping carrier for a damage claim, regardless of the condition of the box.
- Test fit the all sheet metal before painting. Once body work or paint work has been done to any sheet metal item, it can't be returned! There are no exceptions!
Previous accidents and body work can cause poor fitment of new sheet metal items. It is very important to test fit the fender before painting it. This will allow any necessary body work to either the body or the fender to be done BEFORE it is painted.
Once body work or paint work has been done to any sheet metal item, it can't be returned!
There are no exceptions! If after test fitting you feel the fender will not fit, DO NOT MODIFY IT. Once body work or paint work has been started, the fender can not be returned!
Install the headlights / turn signals / tail lights and fenders to ensure that everything fits correctly before painting. It is much easier to check the correct alignment before the fender is painted than afterwards.
NOTE: All sheet metal parts are sent with a black, sprayed, rust inhibitor. This is NOT paint or a primer. It must be removed prior to applying primer to the sheet metal.
This includes fenders, floor pans, aprons, deck lids ETC. Because this material is not a primer, it is not unusual for scratches to be found in this material. This does not affect the sheet metal as this material MUST BE REMOVED, thus also removing any scratches in the process. Of course dents would be considered excessive. All sheet metal is carefully inspected prior to shipping for dents. Any sheet metal that is received dented must be presented to the shipping carrier for a damage claim, REGARDLESS OF THE CONDITION OF THE BOX.
Shipping
We offer FREE SHIPPING on orders over $100*Orders under $100 cost a flat-rate, $11.95*
*Contiguous United States only. Excludes Hawaii & Alaska.
If you need express shipping, please call us for expedited shipping options. We will try to consolidate as much as possible to offer the lowest shipping rates.
Alaska, Hawaii, Puerto Rico, APO/FPO, & US TerritoriesFor orders to Hawaii, Alaska, APO/FPO, Puerto Rico and other US territories, we will provide you with your shipping options and the costs via phone. The shipping costs for these orders are billed at the time of shipping.
International ShippingWe do not ship internationally. We only ship to the USA and it's territories.
Returns
90 Day Return PolicyYou can return most unused, never installed, like-new items for 90 days from the date of receipt. Items must be in like-new condition.
The following items are final sale:
- Special order items
- Special order upholstery
- Electrical items
- Installed carburetors
- Once mounted, wheels cannot be returned