Engle W-100 - VW Performance Camshaft - For 1.1 or 1.25 Rockers

1 / 1
1 / 1
Does this part fit? Select your vehicle
Part Number: ENG6100
In Stock, only 5 left
$164.95
$140.21
(15% off)
Discounts
Inventory Blowout Sale: Save 15%!(-$24.74)
Add to Cart
Save to Wish List
This item qualifies for free shipping to the contiguous US
$ 30 Day Price Protection Learn More
90 Day Returns Learn More
The W-100 cam pulls well up to about 5500 RPM, or up to 5700 if you swap to 1.25 rockers, dual springs and HD rocker shafts. A stock carburetor (with a rough idle), a single 2 barrel carb, or a pair of dual, single or dual barrel carbs can all be used with the W-100. The more air and fuel you let it control, the more power it will give you, to a certain point anyway!

To wrap it up, this is a good "do it all" cam for engines up to about the 1900cc mark. It can be used with stock heads but performance will increase as the ports and valve sizes increase. You can run this a replacement for a stock cam in stock engines or as a very streetable, performance cam in a 1776, 1835 or 1914. Whether using it with stock or 1.25 ratio rockers it provides good useable power in a wide range of engines.

All Type 1 performance cams are 3 Bolt, "early style" or "flat cams" and fit Type 1,2 & 3, 1200cc(40hp) to 1600cc based engines. The cam requires a separately sold, bolt on cam gear and must be used with a "flat cam" style oil pump.

Engle W-100 Performance Camshaft Specifications:
.420" Valve Lift with 1.1:1 Rockers

Intake & Exhaust:
Duration 276°
Duration 236° @ .050″
Cam Lift .383"
Lobe Center 108°

Common Cam Card Specifications:
Intake Opens: 14°
Exhaust Closes: 6°
Intake Closes: 42°
Exhaust Opens: 50°

Valve Spring Recommendations:
Single "Hi-Rev" w/1.1:1 Rockers
Dual "Hi-Rev" w/1.25:1 Rockers

Recommended Rocker Assemblies:
HD Rocker Shafts & 1.1:1 or 1.25:1

Recommended Compression Ratio:
7.5:1 to 8:1

RPM Range:
Idle to 5500 w/1.1:1 Rockers
Idle to 5700 w/1.25:1 Rockers

Recommended Carburetion:
Stock to Dual, 2 Barrels as displacement increases and performance is desired.

Engle W Series Camshafts are designed for use with 1.1 rockers but can be used with 1.25 rockers.
Setting valve train geometry is crucial when using high ratio rockers. W series cams are great for small to medium displacement street, and mild performance engines with good mid-range performance.

JBugs (along with many other engine builders, racers and auto enthusiasts) recommends using an engine oil with ZDDP or ZDTP or a ZDDP/ZDTP additive in your oil for all flat tappet camshaft engines!



California Prop 65 Warning: Cancer and Reproductive Harm
Please Note:The information listed below is for stock, unmodified VW's manufactured for sale in the US. VW's are commonly modified and very often parts from another year VW may have been installed on your car. California Pacific JBugs is not responsible for any errors if your car has been modified in any way.
VW Beetle
Sedan
1961 - 1977
Ragtop
1961 - 1963
Sunroof
1964 - 1977
Convertible
1961 - 1970
VW Super Beetle
Sedan
1971 - 1975
Convertible
1971 - 1976
VW Karmann Ghia
Coupe
1961 - 1974
Convertible
1961 - 1974
VW Type II (Bus)
Bus
1961 - 1971
Single Cab
1961 - 1971
Double Cab
1961 - 1971
VW Type 3
Squareback
1962 - 1973
Notchback
1962 - 1973
Fastback
1966 - 1973
VW Thing
Thing
1973 - 1974

Shipping

We offer FREE SHIPPING on orders over $100*

Orders under $100 cost a flat-rate, $11.95*
*Contiguous United States only. Excludes Hawaii & Alaska.

Express Shipping
  • We offer express shipping options during checkout.
  • The express shipping cutoff time is 11:30am PST.
  • Express shipping methods do not deliver on Saturdays.
Alaska, Hawaii, Puerto Rico, APO/FPO, & US Territories

For orders to Hawaii, Alaska, APO/FPO, Puerto Rico and other US territories, we will provide you with your shipping options and the costs via phone. The shipping costs for these orders are billed at the time of shipping.

International Shipping

We do not ship internationally. We only ship to the USA and it's territories.

Returns

90 Day Return Policy

You can return most unused, never installed, like-new items for 90 days from the date of receipt. Items must be in like-new condition.

The following items are final sale:

  • Special order items
  • Special order upholstery
  • Electrical items
  • Installed carburetors
  • Once mounted, wheels cannot be returned

For our full returns policy click here.
Questions with Answers
Ask a Question
These parts help you finish the job:
(2)
$64.95
Add to Cart
Adding...
Added to Cart
(1)
$120.95
Add to Cart
Adding...
Added to Cart
(3)
$57.95
Add to Cart
Adding...
Added to Cart
(1)
$57.95
Add to Cart
Adding...
Added to Cart
(4)
$28.95
Add to Cart
Adding...
Added to Cart
(2)
$4.95
Add to Cart
Adding...
Added to Cart
In Stock