The VW Rear Right Bumper Bracket Mount is the sheet metal panel that sits next to the right side of the rear apron. The panel is the rear most portion of the inner fender well that the fender bolts too and is also the right side of the engine compartment. The panel has the inner sheet metal shelf that sits to the right of the 1-2 cylinder head. The right bumper bracket mount panel requires trimming and welding for a proper installation and fits 1968 through 1973 Standard Beetles and 1971 through 1973 Super Beetles.
Test fit the bracket and bumper before painting!
Previous accidents and body work can cause poor fitment of new bumpers and other sheet metal items. It is very important to test fit the bracket before painting it. This will allow any necessary body work to either the body or the fender to be done BEFORE painting. NOTE: All body metal parts are sent with a black, sprayed, rust inhibitor. This is NOT paint or a primer. It must be removed prior to applying primer to the sheet metal.
This includes bumper brackets, fenders, floor pans, aprons, deck lids ETC. Because this material is not a primer, it is not unusual for scratches to be found in this material. This does not affect the sheet metal as this material MUST BE REMOVED, thus also removing any scratches in the process. Of course dents would be considered excessive. All sheet metal is carefully inspected prior to shipping for dents. Any sheet metal that is received dented must be presented to the shipping carrier for a damage claim, REGARDLESS OF THE CONDITION OF THE BOX.
California Prop 65 Warning:
Please Note:The information listed below is for stock, unmodified VW's manufactured for sale in the US. VW's are commonly modified and very often parts from another year VW may have been installed on your car. California Pacific JBugs is not responsible for any errors if your car has been modified in any way.