1968-69 VW Karmann Ghia Complete Wiring Harness - Made by JBugs

This is a complete wiring harness for 1968-1969 VW Karmann Ghia Coupes or Convertibles. Our complete wiring loom will wire your entire car from headlights to tail lights. These complete wiring kits are great for repairing old dried out wiring, or replacing the original wires after a new paint job. The wiring harness is made from original wiring loom schematics, are factory color coded and are made with OEM AMP terminal ends. The wires are factory length and pre-terminated. Our complete harness includes detailed instructions which will simplify the task of rewiring your 1968 or 1969 Karmann Ghia. The harness does not include switches, any wiring that is part of a switch, a fusebox, battery cables, ground straps or relays.

This harness is configured for use with a 7 or 9 prong emergency flasher hazard switch.
For 1968 models with a 2 prong emergency flasher hazard switch, you will need to use a 211953235A switch and a 111953227D flasher relay.

Wiring Harnesses can only be returned if the packaging remains sealed. Once a wiring harness has been opened, it cannot be returned.

Our Complete 1968-1969 Karmann Ghia Wiring Harness includes:

• Fully detailed and illustrated Instruction Manual (including 6 color diagrams)
  
• Main Wiring Harness
  
• Sheathed Starter Power Wire
  
• Reverse Wiring Harness (with separate power wire)
  
• Reverse Link Wire
  
• Coil to Carburetor Link Wire
  
• Left Tail Light Ground Wire
  
• Dash Light Link Wires
  
• Two Loose Headlight Switch Wires
  
• Front Left Harness
  
• Sending Unit Wire
  
• Horn Power Link Wires
  
• Horn Ground Link Wires
  
• Dome Light & Clock Harness
  
• Front Right Harness
  
• Brake Light Harness
  
• Dash Ground Harness
  
• Hazard Power Link Wires
  
• Turn Signal Link Wires
  
• Five Loose Flasher & Headlight Wires
  
• Nine Loose Wiper & Hazard Wires
  
• Horn Column Ground Wire
  
• Two Headlight Plug Sockets
  
• Eight Grommets
  
• Five Shrouded Terminal Connectors
  
• Two Shrouded Quad Terminal Connectors
  

Please Note: The wires that are attached to the ignition switch, turn signal switch and the steering column bearing are not included with the harness. Those wires are part of those components. The battery ground cable, the battery positive cable and the transmission ground strap are not included.

Wiring Harnesses can only be returned if the packaging remains sealed. Once a wiring harness has been opened, it cannot be returned.