Rockford Fosgate R2-750X5 750 Watt 5 Channel Amplifier

Rockford Fosgate Prime 750 Watt 5 Channel Amp

• Will Drastically Improve both the Clarity and Volume of Your Speakers
• Five-channel design for a full audio system in one package
• Super Small Footprint Fits Easily Under the Any Seat
• Efficient Class D Circuitry Works Well with Classic VW Charging System
• Night and Day Difference vs. Powering Speakers off of your Radio
• Requires an Amp Wiring Kit (Sold Separately)

The Rockford Fosgate R2-750X5 is the perfect amplifier to power your entire stereo system. This Class D amplifier has 4 dedicated, full-range channels to power your speakers and a single mono channel to power your subwoofer(s). The R2-750x5 puts out 100 watts per channel to the speakers at 2 ohms, 50 watts at 4 ohms, and will power 2 channel at 4 ohms when bridged. For the subwoofer channel, it puts out 200 watts at 4 ohms and 350 watts at 2 ohms. In most applications, you will see 50 watts to the speakers and then 350 watts to the subwoofer channel, as long as your subwoofer(s) are wired to a 2 ohm load.

The R2 Prime amps from Rockford Fosgate feature their CLEAN circuitry which are LED clipping indicators that allow you to set your gains at the perfect level. This will ensure you are getting maximum output from your amplifier without clipping and distortion. In addition to the CLEAN circuitry, the R2-750X5 uses Rockford's POWER supply which is unregulated and delivers higher than RMS rated outputs and increases output as your voltage increases.

If you are looking to install a complete stereo system and power both your speakers and a subwoofer, this amp does it efficiently both in terms of power and space. The R2-750x5 allows for easy installation because you only need to install one amplifier, and the power output for the speakers and the subwoofer is plenty to give you great, full range output with plenty of power for the low-end bass. If you are a big bass head, you might want to do a separate 4 channel with either the R2-500x1, R2-750x1, or R2-1200x1. But, for the money, this amp delivers. We recommend using a 4 AWG 100% OFC copper wire to power this amplifier.