Customize your Volkswagen with EMPI's Machine in style Sand Seal Black Anodized VW Crank Pulley that has the timing marks laser
engraved around the edge of the pulley. The crankshaft pulley fits 1200cc (40 Horsepower) to 1600cc Type 1 and 2 engines and
features a stylish 5 hole design and comes with a heavy duty crankshaft seal. To prevent seal wear, the pulley has a stainless steel
collar at the snout.
The sand seal has a 2.26" OD and a 1.665 ID. Sand Seals are intended to keep debris out of the engine at the crankshaft.
They are NOT an oil seal for the crankshaft. If you have oil leaking from the crankshaft, the crankcase pressure is too high.
The issue could be improper crankcase venting or an indicator of an internal issue such as worn piston rings, too much oil pressure,
The outer diameter of this pulley is roughly 6 3/4"/171mm. Coupled with a standard upper pulley with an outer diameter of 4.25"/108mm
the pulley ratio would be approximately 1 to 1.58, meaning the fan will turn 1.58 times every time the cranks makes one full
revolution which is less than the factory ratio of 1.69.
California Prop 65 Warning:
Please Note:The information listed below is for stock, unmodified VW's manufactured for sale in the US. VW's are commonly modified and very often parts from another year VW may have been installed on your car. California Pacific JBugs is not responsible for any errors if your car has been modified in any way.