VW Coil Over Shocks - Front Ball Joint
Free shipping with an order over $100*
- Description
-
Fits Years
-
TechTips
- Shipping
-
Returns
- Q&A
- Shipping & Returns
The lower eyelet has a 12mm (just under 1/2") inner diameter sleeve. The mount on the trailing arm should measure about 11.9mm (just over 7/16").If the hole is "too small" to fit on the lower mount, then the old shock sleeve has rusted in place and must be removed. Sometimes a pair of vice grips is all it takes, sometimes heat, a chisel or even a cut off wheel have been needed.
Compatibility
Helpful Hints
When installing a new shock absorber on the front of your VW, make sure that the old shock sleeve is removed. The bolt that the shock absorber bolts to IS NOT a shouldered bolt. The shaft of the bolt has roughly the same outer diameter of the threaded area. If the old shock sleeve is rusted in place, use a pair of vice grips to break it free and remove it.Shipping
We offer FREE SHIPPING on orders over $100*
Orders under $100 cost a flat-rate, $9.95*
*Continental United States only.
If you need express shipping, please call us for expedited shipping options. We will try to consolidate as much as possible to offer the lowest shipping rates.
We do not ship internationally. We only ship to the USA and it's territories
Returns
90 Day Return PolicyYou can return most unused, never installed, like-new items for 90 days from the date of receipt. Items must be in like-new condition.
The following items are final sale:
- Special order items
- Special order upholstery
- Electrical items
- Installed carburetors