VW Starter Bolt - Starter thru Transmission to Engine
Free shipping with an order over $100*
The “D” Starter Bolt inserts through the starter, transmission, and engine case. The flat side of "D" bolt head rest against the starter which prevents it from spinning while bolting down. It is held in place with a 10 X 1.5 mm nut.
The Upper Engine Bolt installs through the transmission to the engine block. On pre 1971 models it threads into a loose 10 X 1.5 mm nut. On '71-later models it threads into the captive nut which is attached behind the oil cooler.
2 Engine Case Mounting Studs are used at the bottom of the transmission bell housing.
Depending on the year, either 3 or 4 10 X 1.5 mm nuts are used to attach the engine to transmission.